Skip to main content

QY SD Shining Gundam - Mini WIP, Assembly Cure and Review

It has been a while since the last time I blogged. Reality bites and I have to focus on the "more important things in life." Work, girlfriend, and of course going outdoors - a much needed "distraction" to regain my appetite for GunPla. In all honesty my interest has gone downhill and the promised TT Hongli MG Sinanju is nothing more of a plan than a work-to-be-done.

There will always be the GunPla itch so I picked this teeneeweenee SD that caught my eye. Welcome to the club, Shining Gundam!!

To start off, the box.


Runners - 5 in total along with the polycaps


Issue 01: See the yellow fin attached to the head? Don't force to plug it in. You'll only damage the plastic. Shave off the little opening to fully accommodate the fin. Repeat it on the other side.


Issue 02: The usual suspect in QY kits. What I did was shave the male connectors with my hobby knife.


Head done! Notice I used the foil stickers. It's not that I was too lazy to paint the eyes, but I've noticed that during photoshoots, the paint does not shine and give of the glowing effect of like the stickers. But meh, the sticker too did not shine as I expected. Probably QY's quality to blame. I doubt Bandai has this bland color effect in their stickers. *Sigh*


Hand painted the red part in the face. The color was too light for my taste. Oh and for the record, this is why I think Shining Gundam tops God Gundam in terms of design.


Body has no issues at all! All good here.


No issues with the feet too!


Progress so far


Issue 03: Skirt armor has fitting issues. Gently shave the male connector like so


That was it for the assembly cures! Straight build from here on out.


This is my FAVORITE part. Masking before painting. Told you I wasn't lazy! *Trips and bites tongue accidentally*


Messed up a bit on the paint, hence, the gold marker touch ups. The Core Lander looks awesome :)


Shining Gundam complete!!


Front


Back


Side (sort of lol)


Domon: Core Landaaaa!


Rise Shining Gundaaaaaaaaam!!!! *Snap*


All systems green.


Ike!! Shining.....


Finggaaaaaa!!!


Yameroooooooo!!!


Oh yeah! Shining Gundam kind of reminds me of Sonic the Hedgehog in Super Mode.


Kung fu grand master


You should be scared. Be very very scared!



Shining sword?


Who to cut?

Oh great, just great. Me!? AGAIN?!


Along with his buddies


Looking good with all the Gundam cast :D



Pros:
Easy assembly (and fixes)
Has a cool head.
Sturdy for a bootleg.

Cons:
Legs can be problematic. Its feet is too wide to actually give a dynamic pose/separation.
Sliding mechanism in his shoulders could have been better.

By all means, buy this kit ASAP! SD Shining Gundam really tops my SD God Gundam. I used to have a diecast version of this kit when I was young. Probably my most expensive one before. This kit holds dear and has a special place in my heart. Has a gimmicky head that really gives life when performing his final attack. Ooohhh the nostalgia.

*Notice I improved a bit on my photos (If not, then I officially suck). Props to my friend and hobbyist of diecasts Vera for pointing out how lighting is essential in photography. THANKS!

Comments

  1. Can u show me a picture of this sd before it got painted

    ReplyDelete
  2. sorry i can't :(
    i painted this kit when i took it from the runners before assembly.

    to give you an idea how it looked:
    the shades of blue are a bit darker (has a sense of cheap feel to it) and the white is a bit on the gray side too.

    red and yellow are not painted since its color tone is good enough for me.

    ReplyDelete

Post a Comment

Popular posts from this blog

Bandai SD Zeta Karaba Assault - WIP 01

Coming from a competition really fired my GN Drives up! I am now onto my 1st WIP of 2012, SD Zeta! This 2-pack kit was actually bought before I even knew about the GFP competition. But G-SHOT and the 1/144 Challenge came along and the fun and excitement was too hard to pass up! I initially thought of doing Zeta in its accurate colors. Watching Gundam AGE really blew me and I fell in love with white MS's particularly seeing how the G-EXES pawns the UE. Right then and there I decided to try something different, something that I've never tried before (well, sort of). BTW, if you've never encountered the Zeta Karaba Assault it sorta looks like this ~ It is a limited edition color scheme of the MG Zeta V2. The Karaba Assault was piloted by the White Unicorn AKA Amuro Ray. (Photo above is NOT mine. Thank you GundamPH for the reference. Visit his site too. There are a lot of GunPla, mech, and other anime-related cool stuff there to see) Upon straight building this dude, I ...

TT Hongli MG 1/100 Exia Ignition Mode - Review

Assembling bootleg kits can be a pain at times but this MG Exia Ignition Mode was a breeze. I was surprised from the fact that 90% went well and the other 10% were minor fixes - from shaving male connectors to gluing parts. I really enjoyed assembling my first Master Grade (I was hoping it was Bandai, my wallet was not cooperating as expected lol). Action! G...Gu...Gundaaaaaam!!!!!!!!!!! GUUUUNDAAAAMU!!! Ore wa........... Ore Wa Gundam-da!! Exia exterminating target............... Graham: Ike, Setsuna! Live and unlock the future! More swords Setsuna? Target exterminated! Joining the bunch :D Pros: Assembling is pretty easy for a bootleg Build is sturdy It came with LEDs! Cons: Joints are too stiff (for my liking, anyways, it made the kit solid though) Swords at his wait does not fit the peg in the hand Exia Repair parts does need half of the non-Repair head. (didn't bother with the transformation) The Exia Ignition Mode is a must have! I'm really g...