Skip to main content

Bandai RG Freedom - Review

First plan with this kit was to finish it as simple and as fast as possible. Sucking at panel lining, immediate change of plans to remedy the fugliness it turned out. Inspired by kits with dirt, wear and tear, and realism, I ventured in dry brushing hoping to hone my modelling skills (sure). And of course, fix the clusterfuck it has become.

Thus I present, FREEDOM!

Happy with the weathering but still needs a bit of polish on some parts are too busy or too "clean"





Accessories


Wings are a sight to behold




Real Grade open hatch feature. Minimal but an effective kick




Weather on the skirts and feet are perfect IMO. Glad I was able to pull it off :)


Dim with the shot of the thrusters but the details on them are well put


My only Kira figure. Does not project as action-y as I would like but oh well...


Aaaaand ACTION!


One man army is here there's nothing to fear


Pew pew pew!



Sword get


Hissastsu


Had fun with the dual wield


Maul's apprentice



Signature pose: BEAM SPAM!!!


Zoom zoom pew pew zoom pew!






Pros:
Wings are awesome
Articulation
Major upgrade with the solidity of the kit
Separate hands made holding weapons easier

Cons:
As with all RG's, material used with the inner frame got loose FAST. Joints reinforced using clear cutex LOL
Lowest binder on the wing is a bit loose (design flaw)

Wasn't fond of the Freedom's design up till now I have feasted with its RG flavor. Appreciated how the wings amped up gloriously in terms of coolness pretty much what the Aile pack does for the Strike. With this, getting the Justice is a no-brainer. Focusing on my UC collection is top priority, Justice would wait a little longer.

RG still is premature for my taste. It's painstakingly hellish during photo shoot with all the issues of instability. A good sign is the kit itself. RG Freedom is a step towards that.

Cheers!
Labels:

Comments

  1. Lightning aceMay 27, 2013 at 2:54 AM

    yeah, sometimes when I try to raise up the right arm of my freedom gundam RG, it falls slowly by the time goes by but my aile strike gundam RG doesn't have that problem, and also I'm quite disappointed that I can't interchange the backpack of the strike and freedom unless I need to do some minor modifications

    ReplyDelete
    Replies
    1. carlsupersuaveMay 27, 2013 at 12:58 PM

      about the loose joints, yeah, my Aile Strike arms are still holding up but RX and Char are failing (probably fiddled with it too much) but Freedom surprisingly got loose FAST. first time trying to pose with the arm held up with its gun didn't hold. luckily my sister's cutex are lying around for reinforcement haha.

      ps.
      dear readers please visit lightning ace's blog here:
      http://lightning-ace.blogspot.com/

      his photos are amazing damn double damn it is

      Delete
  2. AnonymousJuly 30, 2013 at 11:53 PM

    hello, great effect there :D
    i think it's a good idea to make a tutorial about how to create those effect..

    great work (y)

    ReplyDelete
    Replies
    1. carlsupersuaveAugust 8, 2013 at 4:29 AM

      hello and thanks for the compliment! very much appreciated.

      sadly, i don't have the luxury to create a tut with dry brushing :(

      anyway we all start from somewhere and i personally used these tuts for this build and my HG 00 7/s

      http://mytoysaremykote.blogspot.com/2010/03/how-to-build-and-weather-gundam-lesson.html

      http://www.gundammodelkits.com/how-to-gundam-model-kits-weathering-tutorial.html

      http://www.youtube.com/watch?v=PxkV70Jvakw

      HTH
      thanks for visiting my outdated blog :D

      Delete

Post a Comment

Popular posts from this blog

QY SD Shining Gundam - Mini WIP, Assembly Cure and Review

It has been a while since the last time I blogged. Reality bites and I have to focus on the "more important things in life." Work, girlfriend, and of course going outdoors - a much needed "distraction" to regain my appetite for GunPla. In all honesty my interest has gone downhill and the promised TT Hongli MG Sinanju is nothing more of a plan than a work-to-be-done. There will always be the GunPla itch so I picked this teeneeweenee SD that caught my eye. Welcome to the club, Shining Gundam!! To start off, the box. Runners - 5 in total along with the polycaps Issue 01: See the yellow fin attached to the head? Don't force to plug it in. You'll only damage the plastic. Shave off the little opening to fully accommodate the fin. Repeat it on the other side. Issue 02: The usual suspect in QY kits. What I did was shave the male connectors with my hobby knife. Head done! Notice I used the foil stickers. It's not that I was too lazy to paint the eyes, b...
6 comments
Read more

Bandai SD Zeta Karaba Assault - WIP 01

Coming from a competition really fired my GN Drives up! I am now onto my 1st WIP of 2012, SD Zeta! This 2-pack kit was actually bought before I even knew about the GFP competition. But G-SHOT and the 1/144 Challenge came along and the fun and excitement was too hard to pass up! I initially thought of doing Zeta in its accurate colors. Watching Gundam AGE really blew me and I fell in love with white MS's particularly seeing how the G-EXES pawns the UE. Right then and there I decided to try something different, something that I've never tried before (well, sort of). BTW, if you've never encountered the Zeta Karaba Assault it sorta looks like this ~ It is a limited edition color scheme of the MG Zeta V2. The Karaba Assault was piloted by the White Unicorn AKA Amuro Ray. (Photo above is NOT mine. Thank you GundamPH for the reference. Visit his site too. There are a lot of GunPla, mech, and other anime-related cool stuff there to see) Upon straight building this dude, I ...
4 comments
Read more

Bandai RG RX-78-2 Gundam - WIP 01 *and More (Troll Face)

November has been GunPla month for me. Everything is going smooth and I have been progressing faster than expected lately. It's funny because I'm a little busy-er compared to when I was WIPing my Exia Ignition Mode, but anyway here's what I've done so far: Notice that the feet has 3 points of articulation. MG-ish and this is expected since the Zaku II Char is the same Legs gimmick - sliding armor is a win for me :) Color separation of the 'V' in the skirt is awesome. I remember painting that teenee-weenee part on the Ver30thG Body and booster's color separation (ahh yes the different shades) is an eye opener. This is why I fell in love with the RG line <3 The RG Zaku II Char took me more than 2 months to complete the kit and about 2 weeks to slap in the waterslide decals. Here, it has only been 4 days and I'm almost done with the kit's assembly. Ahhh, can't wait to photo Amuro and Char together (no homo!). I guess the excitement e...
2 comments
Read more